Papercrafting Supplies 101: Tools

I’ve been known to say papercrafting is my type of “art” because all you have to know how to do is cut and paste. That isn’t too far from the truth. So far in this series we’ve looked at paper, the key component in papercrafting, and adhesives, the pasting part. Today we’re going to look at the 3rd part of that equation, the cutting, and a handful of other basic tools for paper crafting.

Cutting is necessary for most paper crafts, and if you’re a lot better than I, perhaps you can do it with just a pair of scissors. But most everyone uses a more accurate and faster tool, a paper trimmer. Quick, straight and accurately measured cut lines from a paper trimmer make paper crafting easy. You’ll still want a good, sharp pair of scissors for more detailed (and more rough) cuts, but for most of your cuts, that are just straight lines, get a paper trimmer.

mspapertrimmerThe most common, and usually least expensive, type is the sliding blade trimmer. These trimmers have a small blade that slides up and down in a groove that lays over the paper. It can cut paper and cardstock, but not thicker materials, and usually not more than a couple layers at a time. Many of these trimmers are narrow and have a swing out arm for measuring larger cuts (up to 12×12″ paper). They are light weight and portable, fast and easy to use, and accurate. You can also make partial cuts with them, just part way down the paper, or even only in the middle of the paper, with the measurements down the length. Some of them come with a separate plastic “blade” that can be inserted when you only want to “score” (crease), not cut the paper, (or you can use a bone folder in the groove to make score lines also.) The blades on these trimmers need to be replaced, pretty often if you use them a lot. They will leave a ragged edge when they are getting dull. But blades are inexpensive and easy to replace–just always keep spares on hand. Some feel that the swing out arms don’t give real accurate measurements on larger pieces. (The one pictured, and that I own, has a pull out arm which I think is more accurate.) Most people start with sliding blade trimmer, and usually keep one on hand, even if they add and use the other types.

I own the the Martha Stewart trimmer pictured, and also a Fiskars, perhaps the most well known brand. My Fiskars is older and not as accurate, in my opinion. My Martha Stewart has both cutting and scoring blades, a full length slide out arm, and  a small magnifier on the blade holder that magnifies the measurements down the length of the blade guide. I really like the way it works, but its blade seem to dull faster than any of my other trimmers.

rt200nThe next type of paper trimmer is the Rotary Paper Trimmer. Many of these look much like the sliding blade trimmers but the blade is round and rolls down your paper along the guide. Rotary trimmers can be found with both the swing out measuring arm like most of the sliding blade trimmers, or full width. These trimmers usually cost a bit more than the sliding blade type, but are available in all price ranges. They are very accurate, cut very clean edges and can make very small cuts. This is what I use when I need to take off “just a sliver”. It somewhat bothers me that the entire bar area isn’t see through, like on the sliding blade trimmers, making it harder to cut narrow papers, in my opinion. Also with the round blade, it is harder to make accurate partial cuts, stopping at the exact spot you’d like. Be sure to get a rotary trimmer with plenty of measurement markings down the length by the blade (mine, not pictured, doesn’t). Rotary blades last longer than sliding blades, but cost a bit more to replace. Rotary trimmers also have a narrow cutting mat under the blade that has to be replaced occasionally, when it’s cut up. A bad cutting mat results in inaccurate cuts. Some of the rotary trimmers have optional blades that make various decorative cuts.

My rotary trimmer is a Carl brand (same brand as pictured). I love it’s accuracy and ability to make clean sliver cuts. I love that I can cut (at least) medium weight chipboard with it.
purplecowcombotrimmerThe least common paper trimmer is a guillotine type. This is the type of paper cutter used in offices and schools. It can cut through layers of paper and thicker cardboard and such, and you never have to change the blade. But some find it not as accurate for small, short cuts, or feel it takes up too much room, is too heavy to be a portable take-along, and potentially too dangerous. Others love it as their primary trimmer. It is limited to only making full cuts, from one end of the paper to the other. The one pictured is a combo trimmer that has a rotary trimmer on the other side. The 2 sides also can come apart. I don’t have a guillotine cutter.

timholtzscissors

Along with your paper trimmer, you will also want a good, sharp pair of scissors. To get started, a pair of 8″ basic paper/craft scissors will be fine. Later, you may want to add a pair of precision or specialty scissors, such as the Tonic Studios Tim Holtz non-stick short blade scissors, or Cutter Bee precision scissors. Some people also enjoy having various decorative edge scissors.

There will no doubt be times you will be glad to have an X-acto knife and mat, for cuts your trimmer can’t do, or do well. I also prefer to use my large rotary cutter (and a mat) for cutting thick materials, like chipboard.

In addition to cutters, you will also need measurers. A regular ruler is a necessity–I like my metal X-acto ruler, and perhaps not a necessity but very handy, a centering ruler. A centering ruler has 0 in the middle and then goes out both ways, and is very handy for lining up all the things you want to center on a page or project.

msscoringboardCutters and rulers are very familiar to you, but above I mentioned 2 things that may be unfamiliar to you, scoring and a bone folder. Scoring prepares paper for creating even and crisp folds, without the paper cracking. Although scoring can be done with some trimmers, or even a ruler and bone folder, most paper crafters use the fast, easy and most accurate way, a scoring board. A scoring board has narrow channels–for making straight crease lines on your paper to fold on, at measured distances for making all your lines quickly and accurately. You make these score lines with a bone folder, a tool with a blunt pointed end for scoring and smooth edges for making your folds crisp and sharp after you fold your scored lines, without marring your paper. The score boards I’ve seen all come with a bone folder. You can also buy bone folders separately, if you prefer a different style. Some people also use a stylus for creating their score lines on a scoring board.

I own the Martha Stewart Scoring Board pictured. I like that it has scoring channels every 1/8″, and the envelope tool for lining up your paper to make diagonal scores. It also has a compartment for storing your bone folder. Tip! I ran colored permanent markers down various channels at the measurements I use most often, to give me quick to find visual guides.

Our last tool today is a non-stick, heat resistant craft mat. It will protect your work surface from adhesives, heat and ink. These are different than cutting mats, and are usually made of silicone or teflon material. They work great for protecting your desk from the heat of glue guns or embossing heat guns, and wipe up clean from gluing/taping/mod podging and stamping/inking. I prefer silicone as it’s non-toxic.

These are the basic tools you’ll need for paper crafting. Other tools are specific to specific types of work you do in paper crafting. I will cover those as I cover their area of technique. So to get started, 5 basic tools are needed. You may even already have 2 or 3 of them. You’ll need a paper trimmer and scissors, a ruler, a scoring board and a craft mat, add that to you basic supplies of paper and adhesives and you’re ready to get paper crafting.

Now that we have the basics covered, I’ll be back with add-ons, for other techniques and embellishments you may want use, in the Papercrafting Supplies 201 series.

 

http://teachinggoodthings.com/blog

Check out more DIY projects on Kathy’s blog at Teaching Good Things.

[subscribe2]

Design Studio Update

Slowly but surely I’m making progress in re-doing my design studio. The crafting corner is getting there, and is organized anyhow.

Design Studio Remake - from Me and My House

The tall drawer stacks, to the right, hold stamps, embossing folders, dies and Cuttlebug supplies, heat embossing supplies, punches, ribbon and washie tape, paper scraps, envelopes, paper bags, and other paper misc.

The shorter white stack holds 12×12 paper, card stock, and chipboard. The drawer holds embellishments and markers. The shelf holds ink pads and blending tools. On top is my exacto mat, score board and paper trimmer.

The workstation to the left holds my Cricut and Cuttlebug, small rotary mat and a Cricut mat, to keep it handy. Other Cricut mats are on the side. The drawers hold tools- scissors, other cutters, rulers, Cricut tools, stapler, etc. , adhesives-tapes, ATG, glues, glue gun, glue dots, foam dimensionals, magnets, etc, and paper flowers. The slots at the bottom hold 8.5×11 card stock, grunge board, and other smaller papers, stickers, mod podge, etc.

As you can see on the tall drawers, I still need another paper cube. I thought the work station slots would hold that size, but didn’t, so now I need another one. Other than that, and the fact that I haven’t painted yet–and added a shelf for my Cricut cartridges, I’m loving it. Everything is organized and ready at hand.

 

[subscribe2]

Papercrafting Supplies 101: Adhesives

Papercrafting Supplies 101: AdhesivesAdhesives are something I learned a lot about early on in album making. I had been fine with my basics for cardmaking and other paper projects I’d been doing over the years, but once I started making albums I learned that you really need to use good, scrapbooking-specific adhesives if you want these things to stay together through much handling.

Like papers, you use different types for different things, but three basics will see you through most needs. Also like paper, you want photo safe, acid free products. Adhesives made especially for scrapbooking/paper crafting are best.

1) Double-sided Tape Runner. For just adhering layers–paper to paper or paper to cardstock– that will not be getting much wear/any movement, a tape runner works fine. I have used various brands of the small “snail” type runners and they are ok for light duty (especially in card making and such) but for those that plan to do much paper crafting, I highly recommend a Scotch ATG (Advanced Tape Glider). Those little snail-type runners go through tape really fast, and the ATG is much more economical. The quarter inch size (pictured below) is what you will use most (maybe only. It’s all I have.) ATG tape also works (holds better) than most small snail-type runners I’ve used, but those can be used in a pinch.

2) Strong Double-sided Tape. For adhering pieces that are going to get movement/wear, you want something stronger than a tape runner. You need something that is really going to hold for hinges and binding, chipboard, box making, and such. You don’t want your albums or boxes falling apart. My favorite super-sticking double-sided tape is Scor-Tape, because it can be torn rather than cut, making it fast and easy to use–and economical too.  But I also use Terrifically Tacky (a red line type) because I got a SUPER deal on it in various sizes. Wonder Tape from Ranger would be the same red line type, but I’ve never used that brand. Like ATG, the size you will use most is probably the 1/4″, but I like having the 1/2″ and 1/8″ on hand because I use them sometimes too. I also have 1 1/16″ of Terrifically Tacky that I use sometimes, and will probably get 1″ Scor-Tape when I run out of that. Scor-Tape is much cheaper to use than the red line tapes (unless you get a buy 1 get 4 free deal like I did.)

Papercrafting Supplies 101: Adhesives3) Wet glue. There are some times when you just need a glue adhesive. Tapes are great for most things, but for adhering the insides of pockets (you don’t want your tags and such to stick in the pocket) and when it’s hard to get a precision alignment (tape is stuck for good once it’s stuck,) a quick drying wet glue comes in really handy. Scotch Quick Dry Adhesive is my fave. It is a strong permanent glue that dries quickly, but gives you enough time to reposition if necessary. It is photo safe, acid free, and a little goes a long way. And it doesn’t leave wrinkly papers like most wet glues–perhaps largely because you need so little. Tombo Mono Multi Liquid Glue is also a popular one with scrapbookers, but I’ve not tried it.

Like the papers, these 3 basics will take you far. They may be all you need–or you may want or need other special adhesives at times. Again, I’ll mention one more that you will probably want to have, but isn’t absolutely necessary at the beginning. There’s a good chance you may already have it.

A Glue Gun. There are times, especially when adding embellishments, that a glue gun is the best tool for the job. I prefer a high and low temp one–the low being great especially for laces, ribbons, and such. This is a tool you’ll use for much more than just papercrafting. I’ve used Stanley and other brands before, but am currently using a 40 watt dual temp Surebonder (below).

Other specialty adhesives that you may want for embellishments and dimensional  layering are foam adhesive dots/squares and glue dots. Magnetic discs (by Basic Grey) also stick things together in papercrafting, usually as a closure for an album itself, or interactive parts inside an album.  Duck Tape is another specialty adhesive, used sometimes as a spine for albums.

 

[subscribe2]

Envelope Mini Album

Moving on from toilet paper tubes, to envelopes and notecards–such was my second mini album this summer. This one was created for our eldest granddaughter who is into photography, so I didn’t put any pictures in it.

This project also was made with quite simple supplies, but I expanded a bit, a package of notecards with envelopes on clearance at Staples, a glittery paper pack from Hobby Lobby, a little bit of cardstock for extra pockets and tags, a little bit of ribbon,  a couple empty toilet paper rolls (again), and (I think) a recycled priority mail box again. I did branch out with a few paper punches and a package of paper flowers, and made a duck tape spine.

Envelope Mini Album - from Me & My HouseI added a flower, a tag, and some washie tape to cover the edge of the duck tape spine, to the front – as well as the ribbon to tie it shut.

Envelope Mini Album - from Me & My House

The first page just has a small corner pocket with small tag in it. The second “page” is 2 tp rolls with tags. The third page, a pocket with a folder in it, and journaling lines above the pocket.

Envelope Mini Album - from Me & My HouseEach envelope page creates a pocket, with a pull-out notecard folder in it. Each page is embellished with pockets, tags and flowers.

Envelope Mini Album - from Me & My HouseOn some of the pages border punches form the pocket. Some pages are plain with lines for journaling.

Envelope Mini Album - from Me & My HouseThe last page has a double pocket, with tags in each. Oh, and I added some gemstone bling. 🙂

Envelope Mini Album - from Me & My HouseAnd the back.

I learned a lot about album making with this one. I enjoyed doing more with the punches and pockets, and learning to do the duck tape binding. I also learned that thin envelopes need to be matted to the edge, that Tyvek is a great idea for hinging (I had one coming undone on me and had to do a save,) and that you should just count on your album being too thick and needing a closure–so apply ribbons before adding inside cover papers. 🙂

But I love how it turned out and what I learned along the way of making it. I’ll post a tutorial for envelope minis soon.

[subscribe2]

 

Papercrafting Supplies 101: Papers

I am far from a Papercrafting “expert” but, as perhaps someone a little further on the journey than you, I thought I’d share some of the Basics needed to get started, for the complete newbies. This will be a series of posts, each focusing on one type of supply.

The obvious first is Paper. Generally there are 3 basic types you’ll need. Quality (and thickness) varies from brand to brand. There are also other variations and specialty papers that you may want to use, but certainly don’t need to get started. The one thing you do want to look for in all your paper crafting papers is “Acid & Lignin Free”.

Paper Crafting Supplies: Paper - from Me & My House1) Patterned paper. This is your pretty paper used for decorating your paper projects (cards, albums, tags, altered items, etc.) You can buy individual sheets, but much more popular and economical is to buy “stacks”, pads of various coordinating papers. Usually the thickness is about the same as copy paper, but sometimes almost like a card stock. Most patterned paper is only printed on one side, but double sided is also available (mainly from the big names). Double sided is more expensive, but very helpful perhaps even necessary, for some projects. Usually you want standard 12″ x 12″ (again the most economical). Other sizes are available, 6×6″, 8×8″, and others, more rarely. Occasionally you may want these for the smaller designs on them and/or already precut to the size you want or less waste.

  • Beginners: Start with a stack of 12×12″ patterned paper in a design you love.
  • Tip!: You can get larger stacks of more varied paper very economically – especially because many of the big name craft stores carry their own lines and put them on sale at 50% off regularly. 180 sheets for $9.99 is common.
  • Tip!: Save your scraps. Most, even small ones, can be used in other projects.

Paper Crafting Supplies: Card Stock - from Me & My House2) Card stock. This is what backs your pretty patterned paper to give it more sturdiness. You’ll use it for your card bases, your album pages, tags, etc. There are different weights, you’ll usually want something fairly sturdy, 65# or more. Card stock comes in both 12×12″ and 8.5×11″. Generally the 8.5×11″ is fine (and cheaper) for card making and mini albums. The 12×12″ can be useful for some things, and necessary for others (like creating full size album pages.) The 12×12″ comes in more colors, various textures, and sometimes prints. Basic black, white, and “kraft” tan or brown are good for many things, but you’ll want more variety eventually, if not right away.

  • Beginners: Start with a pack of varied basic/neutral colors card stock. 8.5×11″ is fine.
  • Tip!: Greeting cards are generally made from a half sheet of 8.5×11″ card stock. Which way you cut it in half determines which side your fold will be on.
  • Tip!: Save your scrap strips. Most of them will be big enough for hinges in albums.
  • Tip!: Manilla card stock is perfect for making your own tags (much cheaper). File folders work great for this.

Paper Crafting Supplies: Chipboard - from Me & My House3) Chipboard. Though not really “paper”, chipboard is the type of very dense (not squishy) cardboard you use in paper crafts for album covers and other things that you need to be very sturdy. Medium weight chipboard will be appropriate for most of your uses. It doesn’t come in the variety of colors as card stock, usually just black, white, and kraft (tan). But that isn’t a problem, because usually you will be covering it with patterned paper, card stock, or paint/ink. Because the edges show on many/some of the projects you do, you may want to eventually get all 3 colors, but many people just use kraft. (I tend to use black and white more.) Like card stock, chipboard also comes in both 12×12″ and 8.5×11″. (The grey paper to the left is Grungeboard, see below.)

  • Beginners: Start with a pack of medium weight chipboard, which ever color you prefer. I recommend the 12×12″ as being a bit more versatile with less waste. But depending on what specifically you are making, that may not be true for you.
  • Tip!: Sometimes there is a price difference for the various colors. Unless you particularly want a specific color, get whichever is cheapest, though black may show through light colored papers. Grafix is a well known brand.
  • Tip!: If you get packages by priority mail, you can save the boxes and use them in place of chipboard for most small albums that have completely covered covers.

That’s it! Just 3 types of paper stock will get you started in making beautiful albums, cards, tags and other paper crafts.

Tyvek: I want to mention one more type of paper though, because I find it very helpful for keeping my albums secure. Tyvek is a plastic-y paper that large envelopes, like priority mail envelopes, are made of. It is great for reenforcing spines and hinges of albums. You need just a small strip for each. You can buy Tyvek envelopes or recyle ones you get mail in. I highly recommend it for album making, but you don’t have to have it.

Some other specialty papers you may want down the road are:

  • Grunge paper and grunge board–“Grungepaper:  a compressed, flexible, thinner sheet of dingy material that can be punched, painted, inked, sanded, die-cut, or grunged.” It is very strong, so great for spines and such. It’s other properties make it great for dimensional die cuts and more. Grunge board, as expected, is thicker than grunge paper. (See in the Chip board pic above.)
  • Vellum–True vellum is a parchment made from calf skin. Vellum paper you find in the stores mimics this, in a smooth translucent paper that is inexpensive.
  • Acetate–a thin, clear plastic (like transparencies are made of.) Used in papercrafting for making clear pockets or covering other designs with a protective, but see through cover.
  • Foil, Watercolor paper, and other specialty papers may also be used for certain projects. But loke the other specialty papers in this category are not necessary for getting started, unless you are wanting to do a specific project that calls for them.
  • Mini albums are also sometimes made with envelopes (of various sizes), notecards, and paper bags–and even empty toilet paper rolls.

I tend to buy whatever I find on sale at a great price that I like. But do you (that already are paper crafting) have a favorite company? If so, what is it and why do you like it best?

[subscribe2]

 

TP Mini Revisited {Tutorial}

TP Mini Engagement Album - from Me & My HouseWhat could be easier (or weirder) than saving empty toilet paper rolls to put your pictures in? But it works! Here’s how.

Supplies:

  • Empty TP (cardboard) rolls (6) – for pocket pages
  • Chipboard (or recycled priority mailing box) – for cover
  • Patterned Paper – to cover
  • Cardstock – for hinges and tags
  • Closure (recommend Basic Grey small magnetic disks, but I used Velcro, as that’s what I had)
  • Embellishments – to decorate with (whatever you like)

Tools:

  • Ruler, Scissors. Exacto knife and mat – or Rotary cutter and mat especially helpful for cutting chipboard/cardboard.
  • Adhesive – I recommend ATG gun (tape dispenser), ScorTape, and 3M Quick Dry Adhesive (glue). (But I used cheaper, more readily available adhesives – that aren’t quite as good.)
  • Iron, spray bottle of water – optional, but helpful
  • Paper trimmer, score board and bone folder – very helpful, but possible to do without

Step #1Flatten tp rolls. Tip! After flattening by hand, spritz folded edges with water and press with a hot iron. This gets them much flatter.

TP Mini Album Tutorial - from Me & My HouseStep #2Cover tp rolls. Cut patterned paper 1/2″ wider than the dimensions around the roll and 1″ or more taller. (My tp rolls were 2 5/8″ x 4″, yours may be different.) If your pattern paper has a direction, (specific top and bottom,) make sure you cut it correctly for that.

Use ATG (or other adhesive) to attach paper to roll, overlapping the edge in the back, and pushing the ends in. Tip! I scored (creased, to help the paper lay flatter on the rolls,) at 2 5/8″ and 5 3/8″ and folded the excess on the side over first, then wrapped, so it ends along the edge, rather than a seam down the front or back. (I cut my paper at 5.75″ x 4.75″. As you can tell, I should have cut taller, to fold more inside.)

 

Tip! As you tape any pieces, “burnish” (rub over it with your bone folder – or even ruler or finger, or fingernail or such,) to get a good contact/seal.

Tip! You can also cover them with solid colored cardstock, and just cut smaller patterned papers to mat the front and back (about 1/4″ smaller width and height than the tp rolls). This way is great for using up smaller scraps of patterned paper.

TP Mini Album Tutorial - from Me & My House

Step #3 – Cut your cover base boards. Cut chipboard (or recycled mailing box) to make front, bottom, back, top and flap. It should be taller and a bit wider than your tp pages. Mine was 3″ wide and 14″ for front, bottom, back, and top, 3 x 1.75″ for flap. I was able to just fold at my score lines, but if you don’t have a long piece like that, you can use separate pieces covered together. That would be 3×5″ each for front and back, and 3×2″ each for top and bottom (for my size tp rolls,) and flap can be any length you want.

Tip! If using magnetic disks for your closure, attach now to your front and flap. Center each and place the same distance from the top on each piece.

TP Mini Tutorial - from Me & My HouseStep #4Cover your cover base boards. Cut patterned paper to cover your cover base PLUS 3/4″ around each edge. (1.5″ total) Tip! Since your paper is most likely not 17+” long, you will need to piece it. I like my piecing to be at the back of the bottom. (You may not care.) Also if your paper has a direction you will need to take that into consideration as you piece it, so it isn’t upside down on the back and flap. (Mine would be 4.5″ x 17.75″) (In picture is my Score Board.)

  1. Join paper with Scor-Tape (or other double sided strong tape,) to get it long enough.
  2. Put ATG (or Scor-Tape or other double sided tape) around edges of each piece of your cover base, and several strips  in the middle (on 1 side).
  3. Lay you cover base pieces onto your paper, leaving 1/8″ space (about 2 chipboard widths) between each piece and the 3/4″ paper around the edge. Tip! I begin with the back piece on the joining edge, then work out with my other pieces.
  4. After attaching cover base to cover paper, score or turn the card on its edge, to fold the paper smoothly over the edges. Put Scor-Tape along edges of cover base boards and along outer edge of paper, all the way around. Miter corners of cover paper, leaving 1/8″ paper at each corner.
  5. Remove Scor-Tape backing and wrap paper edges around cover boards, smoothing and pushing in corners of paper to cover corners well.
  6. Cut inner cover lining from patterned paper 1/4″ smaller than length and 1/4″ smaller than width, again piecing at the bottom side. (Mine= 2.75 x 17.5″) Attach with ATG or Scor-Tape (or other double sided tape).
  7. Gentle fold cover on the folds (between each piece/side).

TP Mini Album Tutorial - from Me & My HouseStep 5 – Make your hinge. I used Laura Denison’s Stack the Deck Hinge.

  1. Cut 3 pieces card stock: 2.5  x 1.75″, 2.5 x 2.25″, 2.5 x 2.75″ Score and crease at .75″ from both ends of each piece on their NOT 2.5 side. (These 2.5″ wide fit well for the 2 5/8″ wide tp rolls.)
  2. Cover the bottom of each piece in-between center of score lines with Scor-Tape. Do not get tape on the score lines. (If using other double sided tape, you may need to cut the width of the tape down.)
  3. Tape each hinge piece down the center of the one next bigger than it. Tape largest one to center of cover bottom. Burnish each taping well.
  4. TP Mini Tutorial - from Me & My HousePut Scor-Tape on each side of the 6 hinges (sticking up after adhering bottom to cover).

TP Mini Tutorial - from Me & My HouseStep #6 – Attach pockets to hinges. One by one remove backing from Scor-Tape and put TP roll over it–encasing the hinge. Tip! Take care to hold the tp roll open as you lower it over the hinge. Once it sticks, it is stuck. You can do one side at a time if that helps. I also like to fold the hinge over a bit, so it isn’t pressed against the bottom of the hinge. It helps the pages turn more smoothly. You can alternatively use Scotch Quick Dry (wet glue) to attach pockets.

TP Mini Engagement Album - from Me & My HouseStep #7 – Add tags and decorate/ embellish pockets and cover. Cut 6 tags from card stock, at approx. 1/8″ smaller than the width of your tp rolls, and the proper height to fit down your pockets (this will vary depending on how you attached your pockets to your hinges, and what kind, if any, tabs your tags have.) Mine were 2.5″ x 4.5″ with a self scalloped tab. You want your tab to stick out of your pocket. Decorate the fronts of your pockets and outside of cover however you desire.

 

TP Mini Album {Tutorial} - from Me & My HouseI hope this all made sense to you. Someday I may venture into video tutorials–or at least remember to get good pictures of each step that is not readily explanatory in words. But for now, this is what I’m able to do, so I hope you find it helpful. Feel free to ask questions, if there’s something you don’t quite get from my explanations. And a final pic of the inside (before decorating.)

And–Enjoy making a TP Mini Album.

 

[subscribe2]

 

TP Mini Album

Yep, I about fell over when I first heard of this too. But due to its simplicity, easy to do, easy supplies–and of course, uniqueness–that is where I began making albums this summer. I needed a small, easy project to get started.

This was the gorgeous result.

TP Mini Engagement Album - from Me & My House

 

This simple, first album was made with just simple supplies, empty toilet tissue rolls, a paper pack from Walmart, a few flat backed pearls, a couple stick-on “puff” flowers, and a recycled small Priority Mail box (because we don’t have anywhere with chipboard here). I cut tags for each pocket (and a couple of small ones) from my Cricut, but you could easily do those simply by hand. I used only adhesives I could get at Walmart (again, that’s all I have here and I had no idea what I was doing), so basically an Elmer’s tape runner, glue stick, and double sided tape. (Some of it may need restuck already with better adhesives.)

Here’s pics of the rest of the album pages. It is a vertical (tall) album. I sized the pictures I wanted to put in it before sending them to Walmart to print, so they would fit on the tags in the TP pockets. I put a picture on the front of each tag and left the back for “journaling” (for her to write what she wanted about it.) I used only simple designs on the outside of the TP pages, pockets, corner pockets, belly bands, and the cut-outs from the paper pack.

Come back soon for the tutorial of how I made it.

TP Mini Engagement Album - from Me & My House

TP Mini Engagement Album - from Me & My House TP Mini Engagement Album - from Me & My House TP Mini Engagement Album - from Me & My House TP Mini Engagement Album - from Me & My House TP Mini Engagement Album - from Me & My House TP Mini Engagement Album - from Me & My HouseSee you soon with instructions on how to make a TP mini album.

 

[subscribe2]

 

Albums, Journals, and Passions

Sometime this past summer a FB friend introduced me to Scripture Art Journals. I looked around the web at several and fell in love. Just one problem. Although I’m a visionary/designer, I am not an artist. Can’t draw. Can’t paint. Can’t make art journals.

But, in all my browsing, I figured I could make albums and other journals. I can cut and paste–and possibly even stamp. Well, only cut if I have a straight edge or paper trimmer. But I could do that. And besides, it’d put my Cricut and Cuttlebug to more use than just greeting cards and birthday parties.

My daughter was commenting this week about her husband’s trait of jumping whole hog into whatever he is into at the moment. She was kind enough to not say, “Just like you, Mom.” I think that is part of the visionary thing, being passionate about your interests. When I study a topic, I throw myself into it. When I make something, I throw myself into it. When I study how to make something, I throw myself into doing it. It may only be for a season, after which I throw myself into another interest. But it always becomes something I have learned enough about and lived with enough, to be comfortable with and return to in another season.

Anyhow, since my serger was out of commission all summer (and just yesterday, after 2.5 months of being in the shop, after 2 months of sitting here waiting to have the $ to fix it, the shop finally got the part that will hopefully completely fix it…) and I needed a take-along project (for all those ballgames, tournaments, camping trips, etc.) and I was on just too much brain overload for that take-along to be a book to read, writing project, or lesson plans, I decided paper crafting was a good relaxing, summer venture.

I completed 3 different types of albums (and started others) in the last 3 months or so–and have a very special journal design in mind, just for me. Over the month of October I’ll be sharing those with you (with perhaps some new cards scattered in also).

I hope you enjoy them, and that they inspire you to step out and do something creative. If you’re an artist–or can at least “do” art, consider a Scripture Art Journal (google it, I didn’t save any links since I can’t do it.) But if not, perhaps my cut and paste style of book making is more up your alley. We’ll start this week with one everyone has supplies for, a mini photo album made from empty toilet tissue rolls. See you soon with pics and instructions.

P.S. With holiday gift giving (and a new grand-babe) coming up, I’ll probably switch to sewing projects next. And for those of you that just want to be (or only have time to be) in the Kitchen, don’t miss our 5 Favorite Fall Recipes!

 

[subscribe2]

Revisiting Dollhouse Carry Along

Today we are revisiting a post from a couple of weeks ago, as a reader has asked for instructions. So here’s the Dollhouse Carry Along Tutorial.

Dollhouse Carry Along from Me & My House

Supplies: 

  • Plastic Canvas – 2 sheets 10.5 x 13.5″
  • Fabric Pieces (4 fat quarters will work, with leftovers. Choose colors for Roof, Outside, Inside, and Garden)
  • Poly Batting – small pieces
  • Small Hair Elastics – 5
  • Buttons – 5
  • Various Fabric Scraps (small pieces, various colors for decor)
  • Rick Rack and/or Trim Scraps (for decor, if desired)
  • Various Small Felt Scraps (small pieces for decor)
  • Glue gun and glue, scissors, sewing machine, thread and needle

Cut –

Plastic Canvas:

  • 3 pieces @ 4 x 6″ for front, back and floor
  • 2 pieces @ 2.75 x 6″ for roof
  • 2 pieces @ 4 x 6.25″ for sides
    • Cut Side pieces Roof angle as follows. Mark the center point on 1 short edge (2″). Beginning at 4″ up the sides (on both sides) measure 2.75″ up and in to that halfway point. It will be not quite up to the full 6.25″. (Hopefully this illustration will help this make sense.)

Dollhouse Carry Along from Me & My House

 

 

*Note: I used my rotary cutter and mat to cut the pieces, and cut the plastic along the outside edge of the lines, so no little nobbies were sticking out.

Batting:

  • 2 pieces for each plastic canvas pieces – cut 1/4″ larger –
    (6@ 4.25 x 6.25″, Roof 4@ 3 x 6.25″, Sides 4@ 4.25 x 6.5″)
  • Cut angle for Side roof pieces just outside the plastic piece edges

Fabric:

  • Fabric #1 for Outside of house –
    • 1@ 13.75 x 7.5″ for front, back, and floor
    • 2@ 5.25 x 7.5″ for sides (cut angle as for batting above, PLUS leaving your 1/2″ seam allowance)
  • Fabric #2 for Roof and Handles
    • 2@ 4 x7.5″ for roof
    • 2@ 10.5 x 2.5″ for handles
  • Fabric #3 for Inside of house –
    • 1@ 12.5 x 7.5″ for back roof, back wall and floor
    • 2@ 5.5 x 7.5″ for side walls
  • Fabric #4 for “Garden” flap – 1@ 8.25 x 7.5″
  • These fabric measurements are approximates. You may need to add an extra .25-.5″ depending on how thick your batting is. These measurements will allow you between .25″ and .5″ seams. My batting was not the real thick kind.

dollhousefabric

Step 1

Hot glue batting to both sides of each piece of plastic canvas, centering plastic on batting. Be careful pushing the batting and canvas together, the glue is HOT!

Step 2

Lay Outside Side pieces face up. Lay 1 Inside Side piece on top of each, face down. Stitch each together around sides and roof (leave bottom open.) Turn right side out, push corners out, press. Put batting covered plastic piece in each Side.

dollhousesides

Step 3

With right sides together: Sew Garden piece to one end of Inside piece. Sew Roof pieces to Outside piece, 1 to each end. Sew each handle piece into a tube, and turn right side out. Press each of these pieces/seams.

Step 4

Lay Inside face up. Pin handles (facing in) at each end, approx. 1.5″ in from each side. Pin Side pieces to Inside piece (Inside prints facing), just above the Garden piece, (roof point facing in,) lining up raw edges.  Pin elastics on each side of the Garden piece, at about .75″ and 4″ down the side (near the top of the roof, and just under the roof, of Outside piece – after seam allowances.) Your last elastic goes at the center of the end of the Garden piece (or other end). You should have just enough elastic on the inside of your seam allowance to loop around your button.

Dollhouse Fabric Layout

Step 5

Stitch around all sides, leaving an opening in the center of one short edge large enough to turn right side out. Be careful to not catch the points of your Side roof in your stitching. Turn right side out and press (not over the Side pieces, or the hot glue will melt and get on your fabric).

*Note: I backstitched over the elastics a couple of times, to make sure they were quite secure.

If I were to do it again, I’d leave the opening in the Back instead of front as my picture shows. I’d also probably put the last elastic loop on the Back of the Roof (instead of the Garden end), so the button would be on the front – but that’s purely aesthetic preference.

Step 6

Insert covered plastic pieces in this order, Roof, Wall, Floor, Wall, Roof. Topstitch between each of these pieces. (I did this piece by piece. Put 1 piece in , stitched close to it, added the next, stitched close to it, etc. making sure my stitches lined up with my seams for the roof and garden.)

Dollhouse Carry Along from Me & My HouseStep 7

Handstitch your opening closed, and your Back walls to Side walls, and back Roof to Side roof angles. (I did mine from the inside, then turned it out.) Position your buttons on Sides and Back of roof and stitch them on.

Dollhouse Carry Along from Me & My House

Dollhouse Carry Along from Me & My House

Dollhouse Carry Along from Me & My HouseStep 8

Decorate your house – however you’d like. I used both felt pieces, and fabric pieces that I’d ironed interfacing to. And a permanent marker. I hot glued the pieces on – except the bed is loose. My shapes were just cut freehand – and I am NO artist. (If I’d had more time, I may have used my Cricut.) The bed is made from card stock, as a box form, then covered with fabric. The “pillow” is raised by some batting under it. The mirror is made by heat embossing with silver embossing powder.

Dollhouse Carry Along from Me & My House

Dollhouse Carry Along from Me & My HouseI hope these instructions are clear enough to follow. I didn’t write down what I did as I did it, so I’m trying to remember step-by-step. Thankfully I did take several pictures along the way.

Enjoy!

I’d love to see yours after you make one.

[subscribe2]

Wedding Card

September has been a good month to catch up on posting my cards, as it is the rare month with only 1 birthday in it (whose card I have not posted yet.) I’m ending the month with the wedding card I did for our daughter and her husband. (Sorry for pic quality, its the only pic I have of it.)

weddingcardI loved the idea of the bride and clothes made from hearts when I saw it, so knew I had to use it on their card. I embossed dots for the grooms buttons, and double embossed (pressed and heat) the swirls on the brides dress. I’m not sure if you can tell in the pic, she has a “diamond” necklace. The paper roses were from a die cut, then twirled.

Have you tried double embossing?

This post was shared on Blog Hop Wednesdays at Joyous Notions.

 

[subscribe2]